Both LIN channels (common ground) are optodecoupled against USB and CAN FD.Bit rates from 1 kbit/s up to 20 kbit/s.Induced error generation for incoming and outgoing CAN messages.Measurement of bus load including error frames and overload frames on the physical bus.CAN termination can be activated through a solder jumper.Each CAN FD channel is separately opto-decoupled against USB and LIN up to 500 V.FPGA implementation of the CAN FD controller.CAN bit rates from 25 kbit/s up to 1 Mbit/s.CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s.CAN FD support for ISO and Non-ISO standard switchable.Complies with CAN specifications 2.0 A/B and FD.

Extended operating temperature range from -40 to 85 ☌.5-Volt supply at the D-Sub connector can be activated through a solder jumper, e.g.

Transmitting and receiving of CAN FD and LIN messages using 2 D-Sub connections (both with pin assignment for the CAN FD and LIN bus).

Adapter for High-speed USB 2.0 (compatible to USB 1.1 and USB 3.0).

Windows ® 2000 device driver including CAN monitor PCAN-View.PCAN-USB Pro FD – CAN FD and LIN Interface for High-Speed USB 2.0 PCAN-CE package for Microsoft Windows ® CE 6.x. Software for calculating register values for CAN and CAN FD bit rates for Android, iOS and Windows ® 11 (圆4) and 10 (x86/圆4).īit Rate Calculation Tool (Android Version) Documentation included in the download.īit Rate Calculation Tool (Windows Version) Installation for Windows ® 11 (圆4) and 10 (x86/圆4) including interface DLLs, configuration software, PCAN-Basic API and PCAN-ISO-TP API. Pass-Thru API and connection of Pass-Thru software to PEAK-CAN interfaces. Software for displaying, sending and recording CAN and CAN FD messages for Windows ® 11 (圆4) and 10 (x86/圆4).ĪPI for developing applications with CAN and CAN FD connections for Windows ® 11 (圆4) and 10 (x86/圆4).ĪPI for developing applications with CAN connection for Linux.ĪPI for developing software for communication with control units according to the CAN Calibration Protocol (CCP) for Windows ® 11 (圆4) and 10 (x86/圆4).ĪPI for developing software for communication with ECUs in accordance with the Universal Measurement and Calibration Protocol (XCP) for Windows ® 11 (圆4) and 10 (x86/圆4).ĪPI for the transmission of data packets according to ISO-TP (ISO 15765-2) for Windows ® 11 (圆4) and 10 (x86/圆4).ĪPI for communication with control units according to UDS (ISO 14229-1) for Windows ® 11 (圆4) and 10 (x86/圆4).ĪPI for vehicle diagnosis according to OBD-2 (ISO 15765-4) for Windows ® 11 (圆4) and 10 (x86/圆4). Tools included: PEAK-CPL, PCAN-View, PLIN-View Pro and Virtual PCAN-Gateway.ĭevice driver for PEAK CAN interfaces from Kernel 2.6. Installation package from PEAK-System for device drivers and tools for Windows ® 11 (64-bit), 10 (32/64-bit) for our PC interfaces.

Ipeh 002021